Bosch DL 0 607 561 101 Manual Del Usuario página 11

Maintenance and Cleaning
Before performing any work on the unit itself,
disconnect the air supply.
Keep the unit and the tool holder clean at all times.
If the machine should happen to fail despite the care
taken in manufacture and testing, repair should be
carried out by an authorised customer services agent
for Bosch pneumatic tools.
For all correspondence and spare parts orders, always
include the 10-digit order number of the machine.
Lubrication
Lubricant:
Special gearbox grease 225 ml
3 605 430 009
SAE 10/SAE 20 motor oil
Clean regularly the screen on the air inlet of the
machine. For this purpose, unscrew the hose
connection piece 4
particles from the screen. Then firmly remount the
hose connection piece.
Wash out the gearbox with petroleum after the first
approx. 150 hours of operation and then every 300
hours of operation and lubricate with special gearbox
grease.
Any Bosch customer service centre can perform this
work quickly and reliably.
Dispose of lubricants and cleaning agents in an
environmentally correct manner. Observe legal
regulations.
Environmental Protection
Recycle raw materials instead of
disposing as waste.
Machine, accessories and packaging
should be sorted for environment-
friendly recycling.
These instructions are printed on recycled paper
manufactured without chlorine.
and remove dust and dirt
Specification subject to alteration without notice
Guarantee
We guarantee Bosch products in accordance with
statutory/country-specific
purchase by invoice or delivery note).
Damage attributable to normal wear and tear, over-
load or improper handling will be excluded from the
guarantee.
In case of a claim, please send the machine,
completely assembled, to your dealer or the Bosch
Service Centre for pneumatic tools or power tools.
Preferential
Partner
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
Middlesex UB 9 5HJ
Service . . . . . . . . . . . . . . . . . . . . . (01895) 838782
Fax . . . . . . . . . . . . . . . . . . . . . . . . . . (01895) 838789
Advice line . . . . . . . . . . . . . . . . . . (01895) 838402
Ireland
Beaver Distribution Ltd.
Greenhills Road
Tallaght-Dublin 24
. . . . . . . . . . . . . . . . . . . . . . . . . . . (01) 4515211
Fax . . . . . . . . . . . . . . . . . . . . . . . . . . . (01) 4517127
USA
Power Tool Service
3718 Polk Avenue
Houston, TX 77003
. . . . . . . . . . . . . . . . . . . . . . . . . . (713) 228-0100
Fax . . . . . . . . . . . . . . . . . . . . . . . . . . (713) 228-0619
Declaration of Conformity
We declare under our sole responsibility that this
product is in conformity with the following standards or
standardization documents:
EN 792, EN 50 144 according to the provisions of the
regulation 98/37/EC.
Dr. Gerhard Felten
Robert Bosch GmbH, Geschäftsbereich Elektrowerkzeuge
regulations (proof
Dr. Eckerhard Strö t gen
11
of