Seca 675 Manual Del Usuario página 18

1. Congratulations!
By purchasing the seca 675 electronic
platform scale you have acquired a highly
accurate and sturdy piece of equipment.
seca has been putting its experience at
the service of health for over 150 years
now, and as market leader in many coun-
tries of the world, is always setting new
standards with its innovative develop-
ments for weighing and measuring.
In accordance with national regulations, the
seca 675 platform scale is used primarily
in hospitals, doctors' surgeries and in-pa-
tient nursing facilities. The scales are a
Class I medical product, and have been
calibrated in accordance with the preci-
sion class III.
2. Safety
Before using the new scale, please take a little time to read the following safety instruc-
tions.
• Follow the safety instructions in the in-
struction manual.
• Keep the operating manual and the
declaration of conformity contained
therein in a safe place.
• Do not drop the scale or subject it to vi-
olent shocks.
• Place the scale carefully in its position
for use.
• Avoid pulling hard on the connecting
cable to the display unit.
• Secure the scale so that it does not fall
over when stored in the upright posi-
tion.
• When moving the scale in its upright
position, take care that it does not fall
over.
18
The seca 675 has two weighing ranges
which can be selected. Weighing range 1
has a reduced maximum capacity but
greater display resolution, whilst weighing
range 2 allows you to use the maximum
load capacity of the scale. Weight is deter-
mined within a few seconds.
Using the Pre-Tare function, you can store
the weight of a wheelchair. This weight is
automatically deducted in the weighing
operation.
The scale is of a very sturdy construction
and will give you long and loyal service. It
is easy to operate and the large display is
easy to read.
The seca 675 can be moved on castors.
• Be sure to use only the seca mains unit
supplied. Before plugging the mains
unit into a socket, check that the mains
voltage indicated on the mains unit
matches local mains voltage.
• When using the scale with a mains unit,
ensure that the supply cable is routed in
such a way as to exclude any type of
tripping hazard.
• The cable between the weighing plat-
form and the case must be laid so that it
does not present a tripping hazard.
• Have scale serviced and re-calibrated
on a regular basis (see "Servicing/recal-
ibration" on page 28).
• Have repairs carried out exclusively by
authorised persons.