Fitting The Display; Desk-Top Stand - Seca 675 Manual Del Usuario

3. Before you start...
Unpacking
Remove the packaging and place the scale on a firm, level surface.
The scope of supply includes:
• Weighing platform
• Display head plus connecting cable
• Wall bracket
• 1 angle adapter
• 2 Screws
• 2 Rawlplugs
• 1 seca mains unit
• Set of operating instructions plus decla-
ration of conformity

Fitting the display

– Carefully put down the scale.
– Connect the connecting cable to the
electronics box.

Desk-top stand

– Position the desk-top stand on the dis-
play casing from underneath.
The broad side must be located at the
top of the display. The desk-top stand
locks in position.
– Place the display casing on a desk-top.
Model 675
GB
19