Cleaning And Care; Emptying The Dust Container; Cleaning The Filters - Beko VCO 92702 AB Manual Del Usuario

4

Cleaning and care

Switch off and unplug the appliance before
cleaning it.
WARNING: Never use gasoline,
A
solvent, abrasive cleaning agents,
metal objects or hard brushes to
clean the appliance.
4.1 Emptying the dust
container
The light around the suction power adjustment
button (3) turns red from white when the dust
container is full.
1. Press the dust container removal button "
(7) and remove the dust container (8).
2. Press the dust container release button "
(1).
– Open the dust container (8) cover and empty
the container.
10 / EN
3. When you have emptied dust, close the dust
4. Insert the dust container (8) into its place.
4.1.1 Cleaning the cyclone
Open the cyclone lid (11) and empty the cyclone to
remove the dust in it.

4.2 Cleaning the filters

Replace your filters at regular intervals according
to the frequency of use. It is recommended that
you replace the filters every 6 months for average
use.
"
While you empty the dust accumulated in the dust
container to clean the container, you need to clean
the motor protection filter, the foam filter and
HEPA filter as well.
"
Cyclone
lid
Dust
container
cover
container cap (8); a click sound will be heard.
A
WARNING: Do not use appliances
producing hot air such as hair dryer
or heater to dry the filters.
WARNING: Do not install the
filters without completely drying
A
them; otherwise, smell of moisture
may occur during use, water can leak
from the back of the appliance or the
filters may get damaged.
A
WARNING: Attach the filters into
their places after they have dried.
Vacuum Cleaner / User Manual