Upholstery Tool; Adjusting The Suction Power - Beko VCO 92702 AB Manual Del Usuario

3 Usage
3.5.1 Adjusting the EasyDrive
multi-purpose brush
Set the adjustment latch on the EasyDrive
purpose brush (13);
• To " " for hard floors and parquet.
• To " " for rugs and carpets.
3.6 Operation
1. Plug in the appliance after pulling the power
plug located at the back of the appliance.
2. Press the on/off button (6) to switch on your
appliance.
3.6.1 Adjusting the suction
power
You can increase the suction power of the appliance
by turning the suction power adjustment knob (3)
located on the body of the appliance clockwise
according to the type of the surface to be cleaned.
To decrease the suction power, turn the suction
power adjustment knob anti-clockwise.
1. Use level to clean curtains, table clothes
and sofas.
2. Use level to clean dirty carpets.
3. Use level to clean hard floors.
4. Use level to clean extremely dirty hard
floors and carpets.
8 / EN
3.7 Accessories
™
Crevice tool
multi-
™

Upholstery tool

Dust brush
A
3.8 Hard floor brush
The hard floor brush (19) was developed for use on
hard floors such as tile, ceramic, parquet, wooden
floors etc.
It prevents potential scratches while cleaning hard
floors thanks to its specially-developed soft hair.
Suitable for the cleaning of the
surfaces which are difficult to
clean, such as the areas remaining
under sofas and furniture.
Suitable for cleaning the floorings,
stair steps, inside of the cars,
sofas, armchairs etc.
Suitable for cleaning the curtains,
and sensitive and fragile objects.
WARNING: Do not make cleaning
by using the handle' s (18) end part.
Vacuum Cleaner / User Manual