Ec Declaration Of Conformity - Milwaukee AG 22-180 Manual Original

STARTING CURRENT LIMITER + SMOOTH START
AGV 22-180 E, AGV 22-230, AG 22-230 E, AGV 22-230 E:
The starting current for the machine is several times greater than
rated current. The starting current limiter reduces the starting cur-
rent to such an extent that a fuse (16 A, slow-blow) is not tripped.
Electronic smooth start for save use prevents jerky run-up of the
machine.

EC DECLARATION OF CONFORMITY

We declare under our sole responsibility that this product is in con-
formity with the following standards or standardized documents.
EN 60745-1:2009+A11:2010
EN 60745-2-3:2011
EN 55014-1:2006+A1:2009+A2:2011
EN 55014-2:1997+A1:2001+A2:2008
EN 61000-3-2:2006+A1:2009+A2:2009
EN 61000-3-3:2008 (AGV 22-180 E, AGV 22-230, AG 22-230 E,
AGV 22-230 E)
EN 61000-3-11:2001 (AG 22-180, AG 22-230)
in accordance with the regulations 2011/65/EU (RoHs), 2006/42/
EC, 2004/108/EC
GB
Winnenden, 2012-10-30
MAINTENANCE
The ventilation slots of the machine must be kept clear at all times.
Do not let any metal parts enter the airing slots - danger of short
circuit!
Use only Milwaukee accessories and Milwaukee spare parts. Should
components need to be replaced which have not been described,
please contact one of our Milwaukee service agents (see our list of
guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state
the Article No. as well as the machine type printed on the label
and order the drawing at your local service agents or directly at:
Milwaukee Electric Tool, Max-Eyth-Straße 10, D-71364 Winnenden,
Germany.
English
18
SYMBOLS
Rainer Kumpf
Director Product Development
Authorized to compile the technical le
Please read the instructions carefully before starting
the machine.
CAUTION! WARNING! DANGER!
Always wear goggles when using the machine.
Always disconnect the plug from the socket before
carrying out any work on the machine.
Accessory - Not included in standard equipment,
available as an accessory.
Do not dispose of electric tools together with
household waste material! In observance of European
Directive 2002/96/EC on waste electrical and electro-
nic equipment and its implementation in accordance
with national law, electric tools that have reached
the end of their life must be collected separately and
returned to an environmentally compatible recycling
facility.
Class II construction, tool in which protection against
electric shock does not rely on basic insulation only,
but in which additional safety precautions, such
as double insulation or reinforced insulation, are
provided.