Toshiba CAMILEO BW20 Guia De Inicio Rapido página 4

4
Getting Started
Getting Started
Charge the built-in battery
You must use the AC adaptor (sold separately) or the USB cable to charge
your camcorder before use.
To charge your camcorder through the AC adaptor (rated at 5 volts, 2
amps), follow these steps:
1 Plug the AC adaptor into an AC wall socket, and connect its
mini USB plug into the mini USB port on the underside of the
camcorder.
The blinking light indicates that the battery is currently charging; the light
glows continuously once charging is completed.
The full charge time from the AC adaptor is approximately 4 hours.
(Actual charging time will vary, depending on battery condition and
charging conditions.)
To charge your camcorder through the supplied USB cable, follow these
steps:
1 Connect your camcorder's mini USB port to a USB port on your
computer, with the supplied USB cable.
The blinking light indicates that the camcorder is currently charging, and
the light remains on after the charging is completed.
Charging the battery through the USB cable takes approximately 5 hours.
(Actual charging time will vary, depending on battery condition and
charging conditions, including power availability from the computer's
USB port.)
Never charge the battery by a method other than as instructed.
Doing so may cause a fire or explosion possibly resulting in
serious injury.