Mounting Instructions - Uline H-1133 Manual Del Usuario

NOTE: Recommended mounting height is
48-54" from the floor to bottom of dispenser.
NOTE: Ensure that proper mounting hardware
is used for appropriate wall composition as
enclosed hardware may not be compatible
with your wall surface.
1. Insert the key into the lock opening on the top of
dispenser and push until cover pops open. If push
button is installed, gently push the button until the
cover opens. (See Figure 4)
Figure 4
2. Open dispenser cover and hold dispenser to ideal
mounting place on wall. (See Figure 5)
Figure 5
PAGE 2 OF 9

MOUNTING INSTRUCTIONS

3. Mark the four holes on the wall where screws will be
4. Drill into wall at four marked locations with 1/4" drill
Side Lens
5. Hold dispenser over previously drilled holes and
inserted. (See Figure 6)
Figure 6
Recommended Mounting Locations
bit. (See Figure 7) Insert wall anchors if necessary.
Figure 7
insert screws. (See Figure 8)
Figure 8
0721 IH-1133