Kohler K-3437 Guia De Instalacion página 5

Wax Seal
3. Install the New Toilet
Install or relocate the supply and outlet as necessary to conform
to the roughing-in dimensions.
Install a supply shut-off valve.
Record the model number in the Homeowners Guide.
Lay the toilet down onto a padded surface.
From the bottom of the toilet, firmly press a new wax seal around
the toilet outlet.
Remove the temporary rag (if used) from the toilet flange hole.
Align and lower the toilet over the flange and T-bolts.
CAUTION: Risk of external leakage. Do not lift or rock the
bowl after placement. If you break the watertight seal, you must
install a new wax seal.
Apply your full body weight around the toilet to set the seal.
Assemble the washers and nuts onto the exposed T-bolts.
CAUTION: Risk of product damage. Overtightening may cause
breakage or chipping of vitreous china.
Carefully tighten the nuts.
NOTE: To achieve optimum performance, be sure the bowl is level.
Kohler Co.
Longer Tab
Nut
Washer
5 1021801-2-A