Technical Data; Definitions: Safety Guidelines; English (Original Instructions) - DeWalt DWE46106 Traducido De Las Instrucciones Originales

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
CUT-OFF TOOL WITH 125 MM CUTTING SHROUD
DWE46106, DWE46107
Congratulations!
You have chosen a D
WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
V
AC
Type
Power output
W
Rated speed
min
-1
Wheel diameter
mm
Wheel body thickness
mm
Spindle diameter
Spindle length
mm
Weight
kg
Noise values and vibration values (triax vector sum) according to EN60745-2-22:
L
(emission sound
dB(A)
PA
pressure level)
L
(sound power level)
dB(A)
WA
K (uncertainty for the
dB(A)
given sound level)
Vibration emission value
m/s
2
a
=
h
Uncertainty K =
m/s
2
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN60745 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.

WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of work patterns.
WALT one of the
e
DWE46106
DWE46107
230
230
1
1
900
1400
11800
11500
125
125
1.2
1.2
M14
M14
14.2
18.5
2.92
3.25
94
96.5
105
107.5
3
3
3.4
3.8
1.5
1.5
EC-Declaration of Conformity
Machinery Directive
Cut-Off Tool with 125 mm Cutting Shroud
DWE46106, DWE46107
D
WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010,
EN60745-2-22:2011+A11:2013.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Vice-President Engineering, PTE-Europa
D
WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
03.01.2020
WARNING: To reduce the risk of injury, read the
instruction manual.

Definitions: Safety Guidelines

The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.

Denotes risk of electric shock.

Denotes risk of fire.
EngLIsh
WALT at
e
WALT.
e
21

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Dwe46107

Tabla de contenido