Qstarz BT-Q1300 Manual Del Usuario página 5

Beyond Navigation
................................................................................................................................................................................................................
3. <File> \ <Clear Log>
Clear the data stored in the Travel Recorder.
4. <File> \ <Config GPS>
Configure the recording method of the flash memory of Travel
Recorder.
4.1 Connection Setting
I. Auto Scan GPS Module (Recommended)
The program will automatically detect the com port. It is
recommended to set to auto scan.
II. Manual Setting
Users can also manually set the port. Please refer to users'
manual for more detail information.
4.2 GPS Log Setting
There are 4 log modes: General mode, vehicle mode,
cycling mode, and hiking mode. Users can also change
the default setting of these 4 modes.
4.3 Data Log Memory
Overwrite:
When the memory is full, Travel Recorder will
Stop Log:
When the memory is full, Travel Recorder will
5. <Photo/Media> \ <Add Media Files>
Users can add media files from a file folder, or selected files.
5.1 Add media files from a folder: Select a folder to add media
Add media files from selected files: Use Ctrl‐Click, or
5.2 After photos are added, all photos will be shown on the
<Photo View> and <Photo List> window. Under <Photo View>
................................................................................................................................................................................................................
www.Qstarz .com
keep logging by overwriting the memory
from the earliest point.
stop logging.
files.
Shift‐Click to select multiple
files.
English
5