Zeegma Zonder Robo Vision Manual De Usuario página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 50
INTRODUCTION
EN
Dear customer!
Thank you for placing trust in us and choosing Zeegma.
We provide you with a product perfect for everyday use thanks to the use of high-quality
materials and modern solutions.
We are sure that the product will satisfy your requirements as it has been designed with
utmost care. Before you use the product, please read this manual carefully.
Should you have any remarks or questions concerning the product,
please contact us:
support@zeegma.com
IMPORTANT
Please read this manual before you start using the device to get familiar with its functions
and use them in accordance with intended use. A failure to follow the safety guidelines and
use at variance with the manual may lead to electric shock, fire and serious injuries.
IMPORTANT! KEEP THIS MANUAL FOR FUTURE REFERENCE!
1. Do not repair or modify the device. Only an authorized service technician is allowed
to perform these operations.
2. Do not start the device if you have noticed any damage. This applies to the docking
station and power supply.
3. Do not use the device when it starts acting up, has been dropped or wetted, overhead
extensively, is discolored or deformed, emits abnormal sounds, odors and when other
atypical circumstances occur. In such cases please contact the authorized service center.
4. If you do not use the device for a long time, turn off the cleaning robot using the main
switch and unplug the docking station.
5. The device is not intended for vacuuming industrial surfaces.
6. The device is not intended for vacuuming wet surfaces. It may damage the product.
7. This device is not a toy. Do not let children play with it.
8. The device should operate at the room temperature. Do not switch the device on at low
temperatures. Before you start it, the device should be left at the room temperature
for at least 30 minutes.
9. The device is not waterproof, do not immerse it in water or store in humid area.
10. Place the device on a flat and horizontal surface, and avoid slopes. Do not place it on
very soft surfaces.
11. Use the device away from sources of heat, high temperatures, hot surfaces, direct
sunlight, sources of ignition, naked flame, oils and sharp edges.
12. Do not use chemicals to clean the device.
13. Before you start cleaning, switch the device off and disconnect the power supply.
14. Do not use the device for other purposes than designed.
15. Do not suck mud, paste-like elements, ash, plaster and sharp items. It may lead to
damage to dustbin, filter and motor.
16. Do not suck hair, large paper elements, plastic bags which may cause the suction tube
to clog. Remove them from the floor before you start vacuuming.

Publicidad

Tabla de contenido
loading

Tabla de contenido