Braun TrueScan BPW4100 Manual Del Usuario página 8

5. If your wrist position is accurate the the green arm icon on
If the measuring position is incorrect, the measurement can't
BEEP BEEP BEEP BEEP
start, so there is no possibility to obtain a wrong or inaccurate
measurement.
The device will beep rapidly if the positioning system is incor-
rect. You have to move your arm up or down according to the
arrow indication on the LCD screen.
If your wrist position is at the correct level with your heart, the
BEEP BEEP BEEP BEEP
LCD will display and the measurement will start.
Measuring arm: If your wrist position is lower than your heart,
the LCD will display as shown and will beep as "BEEP BEEP BEEP
BEEP".
If your wrist position is higher than your heart, the LCD will
display as shown and will beep as " BEEP BEEP BEEP BEEP".
If the positioning system has been deactivated, you will have no
indication before processing the measurement.
Please note:
• In case of system errors or handling mistakes, the display
the device will appear with a black outline and the device will
sound "BEEP BEEP BEEP BEEP". Directly following the the four
beeps the device will automatically inflate and begin taking
the user's reading. When the measurement is complete the
reading is displayed on the LCD.
TOP: SYSTOLIC VALUE
MIDDLE: DIASTOLIC VALUE
BOTTOM: PULSE
will show an error code, instead of giving you inaccurate
results (for details, please see section «What to do if...»).
8