ConnectingToThePc - Speedlink CARBON LASER RF MOUSE Instrucciones De Manejo

Connecting to the PC
GB
Note for Windows 98
users: The operating
system may prompt
you to insert the
Windows installa-
tion CD if necessary.
Follow the on-screen
instructions.
22
Plug the USB receiver into
any free USB port on your
PC. You can also plug
the receiver into a USB
hub connected to your
computer. The LED on the
receiver will now light up
and your operating system
will automatically detect
that a new device has been
connected.
Synchronisation
Switch the mouse on by
setting the on/off switch
on the underside of the
mouse to ON. Now press
the reset button on the
receiver. The LED on the
receiver will start to flash
slowly. Following that press
the reset button on the un-
derside of the mouse. The
receiver will now search
for the mouse. In doing so,
the LED on the receiver will
flash rapidly. As soon as
the receiver has found the
mouse the LED will remain
constantly lit.
As soon as you transmit
data with the mouse then
the receiver will show this
by a rapid flashing of the
LED.
If Windows prompts you
to connect to the Internet
to find a Windows update
then select No, not this
time and then click on
Next.