OVE ANTIGUA SP 32 Manual Del Usuario página 14

1. Remove the cover of the rollers (H) and Loose the screws a little bit.
2. Adjust the level of the glass panel using the eccentric mechanism of the rollers.
3. Tighten the screws and install the cover of the rollers (H).
4-5. Drill the fixed panel (C) on 3 positions with a ø3mm (1/8in) drill bit. Level the fixed panel (C) and fix it with
the fittings (FF), the screw (DD) and the cap (EE).
6-7. Drill the side panel (Y) on 3 positions with a ø3mm (1/8in) drill bit. Level the side panel (Y) and fix it with
the fittings (FF), the screw (DD) and the cap (EE).
1
H
3
H
5
FF
EE
DD
DOOR PANEL INSTALLATION
6
Y
Φ3mm
1/8in
14
2
H
4
C
Φ3mm
1/8in
7
FF
EE
DD