531739111
Electronic tap with box
1 – Release the screws at the panel and remove it. Turn off the regulating valve.
2 – Disassemble the solenoid valve by opening the nuts.
3 – Remove the filter and wash it under running water.
4 – Reassemble the parts.
5 – Turn on the regulating valve and adjust the flow capacity.
6 – Make sure that there is no water leakage.
7 – Re-assemble the wall cover panel.
Care and cleaning of chrome and special finishes
Do not use steel wool or cleansing agents containing alcohol, acid, abrasives, or the like. Use
of any prohibited cleaning or maintenance products or substances could damage the surface of
the faucet.
For surface cleaning of faucet use only soap and water, then wipe dry with clean
cloth or towel. When cleaning bathroom tile, the faucets should be protected from any splattering
of harsh cleansers.
60
61
//