Philips CEM1100/00 Guía De Inicio Rápida

Always there to help you
Register your product and get support at
Quick start guide
EN
ES-AR Guía de inicio rápida
Guia de início rápido
PT-BR
Specifications are subject to change without notice
2014 © WOOX Innovations Limited. All rights reserved.
This product was brought to the market by WOOX Innovations Limited or one of
its affiliates, further referred to in this document as WOOX Innovations, and is the
manufacturer of the product. WOOX Innovations is the warrantor in relation to the
product with which this booklet was packaged. Philips and the Philips Shield Emblem are
registered trademarks of Koninklijke Philips N.V.
CEM1100_QSG_00_V4.0
CEM1100_00_QSG_V4.0.indd 1
a
CEM1100
d
Quick start guide

What's in the box
Main unit Remote Front panel
(with a sleeve) control
ISO male connector Rubber cushion Screw Disassembly tools
x 1 pc x 2 pcs
Connect wires: ISO male connectors
1
Connect the supplied male connector to the unit.
2
Check the car's wiring carefully and connect them
to the supplied male connector.
a Green/black strip Left speaker (Rear)
b White/black strip Left speaker (Front)
c Gray/black strip
d Purple/black strip Right speaker (Rear)
e Red
f Blue
g Blue/white
h Black
i Yellow
7
3
Connect the antenna and amplifier as illustrated, if
applicable.
9 8
b
e
Turn on
To turn on the unit,
• Press .
To turn off the unit,
• press and hold until the unit is turned off.
Trim plate Carrying case
Select country/region
1
Press to turn on the unit.
» [SELECT OPERATING REGION] is displayed.
2
Rotate to select an option:
• [USA] (United States)
• [LATIN] (Latin America)
User manual Quick start guide
• [EUROPE] (Western Europe)
• [RUS] (Russia)
• [M-EAST] (Middle East)
• [ASIA] (Asia Pacific)
• [JAP] (Japan)
• [AUST] (Australia)
3
Press to confirm.
Set clock
1
Press MENU repeatedly until current time is flashed.
2
Rotate to set hour.
3
Press to confirm.
Right speaker (Front)
4
Rotate to set minute.
5
Press to confirm.
Ignition key +12V DC when
ON/ACC
Motor/electric antenna relay
Listen to radio
control lead
Amplifier replay control lead
1
Press SOURCE repeatedly to select radio mode.
Ground
2
Press BAND or / repeatedly to select band: [FM1], [FM2], [FM3], [AM1], or [AM2] .
To the +12V car battery
3
Press and hold or until the frequency digit is flashed.
which is energized at all times
4
Press or to tune to a radio station manually.
» The radio station is broadcast.
• To search for a radio station automatically, press
c
53mm
f
2
Store stations automatically
1
In Radio mode, press and hold DBB until [STORE - - -] is displayed.
2
Press to confirm.
» The six strongest stations of the selected band are saved in preset channel automatically.
Store stations manually
1
Tune to a station that you want to store.
2
Press a numeric button for 3 seconds.
» The station is saved in the selected channel.
Play a disc
Insert a CD with the printed side facing up.
» Play starts automatically.
• To pause CD play, press .
• To resume CD play, press
• To skip to the previous/next track, press
• To search backward/forward rapidly within the current track, press
Remove the CD
To take out the CD, press on the front panel.
Reset
You can reset the unit to its default setting.
1
Detach the front panel.
2
Press the reset button by using a ball-point pen or a similar tool.
» Preset adjustments such as preset channels and sound adjustments are erased.
or .
1
again.
or .
or for 3 seconds.
2014/5/13 14:50:28