Going To Sleep; Out Of Range - 3M Multi-Touch C2167PW Guia Del Usuario

3M™ Multi-Touch Display User Guide
11
No Signal
The LCD display has been powered on but cannot receive any signal from the computer
graphics card. Check all the power switches, power cables, and VGA/DVI signal cable.

Going to Sleep

The LCD display is in power save mode. In addition, the LCD display will enter power
save mode when experiencing a sudden signal disconnect. The monitor can be activated
by pressing any key, clicking the mouse or touching the screen.

Out of Range

The signal of the computer graphic card is not compatible with the LCD display. When
the signal is not included in the "Video Display Modes" listed in Chapter 2 of this
manual, the LCD monitor will display this message.
3M Touch Systems, Inc. Proprietary Information –
TSD-44310 REV C