Bracket Mounting Option; Access To The Video Controls - 3M C3266PW Guia Del Usuario

11

Bracket Mounting Option

The Multi-Touch Chassis Display includes a hardware accessory kit for mounting the
unit into an enclosure. The hardware accessory kit includes mounting brackets and
screws. The mounting holes are located on all 4 sides of the display. Always use the
supplied screws.
Note: Always use the mounting holes when attaching to the brackets. Do not drill
additional holes in the unit to mount brackets to other locations.
To remove the bezel, simply remove the screws along the edge.
Once you remove the bezel, you can attach the brackets to the edges of the chassis. The
brackets are slotted, allowing the chassis to slide in and out. You can also rotate the
brackets to various positions.

Access to the Video Controls

The Multi-Touch Chassis Display has seven buttons located on the side of the display for
the on-screen menu and adjusting the video display. Make sure you will be able to access
the video controls once the Multi-Touch Chassis Display is installed.
If space is tight and access is important, an on screen display remote control (Part No. 98-
1100-0330-2) is an option (C4267PW, C4667PW, C5567PW only).
All manuals and user guides at all-guides.com
3M Touch Systems, Inc. Proprietary Information
3M™ Multi-Touch Chassis Display User Guide