Safety Devices - NIBBI BRIK 1 Uso Y Mantenimiento

Fig. 13A
Fig 15A

SAFETY DEVICES

The Motorcultivator is equipped with
several safety devices, which are:
1) MOTORSTOP
The working position of the Motorstop
control lever 1 is shown in Fig. 15A.
If, for any reason, the handlebars are
released from the operator's hands, lever
1 will automatically adopt the position
shown in Fig. 15A and thus stop the
engine.
2) CLUTCH HOOK
With clutch hook C (Fig. 15C) inserted,
any power transmission with gears
engaged will be prevented.
1+1
Fig 15B
3) POWER TAKE-OFF HINDRANCE
DEVICE
This very important device avoids the
simultaneous engagement of P.T.O. and
reverse gear, when tiller is mounted.
Therefore, to use the reverse gear, it is
first necessary to disengage the P.T.O.
The hindrance device is automatically
engaged or disengaged when the
forward and reverse gear control lever
is turned.
37
Fig. 14A
Fig 15C
2+2