Trouble Shooting - Gorenje CB8900E Manual De Mantenimiento E Instalación

5 Insert the supports on the interior glass
into the grooves at the top of the door (C).
D
C
6 Lower the glass into the door (D).
7 The glass is fixed to the door by pressing the
two lower supports (E) while pushing the glass
into the door (F).
F
E
Changing the oven bulb
Caution
To change the bulb, first ensure that the oven
is disconnected from the power supply.
• Ease out the chrome supports, releasing
them from the bolt (G).
10
G
• Loosen the lens from the lampholder with
the help of the appropriate tool.
• Exchange the bulb.
• Replace the lens, making sure it fits in the
correct position without forcing it.
The replacement bulb must be temperature
resistant to 300 °C. These can be ordered from
the Technical Service Department.

Trouble Shooting

The oven does not work
Check the connection to the electrical circuit.
Check the fuses and current limiter
of your installation.
Ensure the clock is in the manual
or programmed mode.
Check the position of the function
and temperature selectors
The inside light of the oven does not work
Change the bulb.
Check its assembly in accordance
with the instruction manual.
The heating indicator light does not work
Select a temperature.
Select a setting.
It should only light up while the oven is heating
up to its set working temperature.
Smoke is given off while the oven is working
This is normal during its first use.
Periodically clean the oven.
Reduce the amount of grease
or oil added to the tray.
Do not use higher temperature settings
than those in the cooking tables.
Expected cooking results are not achieved
Review the cooking tables to obtain guidance on
the working of your oven.
NB
If, despite these recommendations, the pro-
blem continues, contact our Technical
Assistance Service.
11