Schlage FE575 Instrucciones De Instalación página 4

Test Lock
Temporary Unlocking
1. Find User Code A on the
cover of these instructions.
2. Enter User Code A
(four digits) into the
keypad.
3. Rotate and then
release lever.
Locking
The lock will automatically relock itself, until a valid User Code is entered.
Quick Programming Reference
Adding User Codes*
Press
Enter
Programming Code
(six numbers)
Wait for
Keypad
turns
3 Orange Lights +
blue
3 Beeps
* These four numbers must be different from the first four numbers of the programming code.
More Programming, Warranty, and Registration Information
For more programming, warranty, and service information, go to
schlage.com/faqs-keypad, or use a mobile device with the code
below:
Press
Enter new
User Code
(four numbers)
Wait for Wait for
3 Orange Lights + 3 Orange Lights +
3 Beeps 3 Beeps
Deleting User Codes
Enter same
Enter
new
Programming Code
User Code
(six numbers)
(four numbers)
Success!
Wait for
1 Green Light +
3 Orange Lights +
Long Beep
3 Beeps
Changing the Programming Code*
Enter
Programming
Code
(six numbers)
Wait for
3 Orange Lights +
3 Beeps
* The first four numbers must be different from all of the User Codes currently in the lock.
Register your product at RegisterMySchlage.com, or use a mobile
device with the code below:
Did latch retract and then extend?
Yes. Lock is installed correctly.
No. Latch retracted but did not extend (latch
bound). Check step 4.
No. Nothing happened. Check step 3.
Press Press
Enter unwanted
User Code
(four numbers)
Wait for
Wait for
Keypad
turns
3 Orange
3 Orange Lights +
blue
Lights +
3 Beeps
3 Beeps
Press Press Enter New
Programming
Code
(six numbers)
Wait for
Wait for
Keypad
turns
3 Orange
3 Orange Lights +
blue
Lights +
3 Beeps
3 Beeps
Enter same
unwanted
User Code
(four numbers)
Success!
1 Green Light +
1 Long Beep
Enter Same New
Programming Code
(six numbers)
Success!
1 Green Light +
Long Beep