Symbols; Using The Product Via The Control Unit; Important; Using The Product Via The Bluetooth - Imetec F2005 Instrucciones Para El Uso

Protection class II
Warning
Prohibited
Temperature selector

USING THE PRODUCT VIA THE CONTROL UNIT

CONNECTING AND REMOVING THE TEMPERATURE ADJUSTMENT CONTROL FIG. (B)

IMPORTANT!

The throw blanket must only be used with the control unit supplied. The relative model is
specified on the label sewn onto the product.
DO NOT place the regulator or flexible electric cable over or under the throw blanket.
NEVER cover the control unit with the throw blanket.
• Insert the plug in the socket.
• Insert the control unit's plug (1) in the socket (2) to connect the temperature adjustment control to the throw
blanket.
• Disconnect the plug (1) from the throw blanket by pressing the plug's side levers (2).
SWITCHING ON THE THROW BLANKET AND SELECTING THE CORRECT TEMPERATURE FIG. (C)
• Turn on the throw blanket from the back of the control unit by placing the switch to ON (I) (9) (Fig. [C]).
• FAST HEAT – select the desired temperature setting by pressing the temperature button (7) (Fig. [C]) until the
desired temperature lights up in red on the temperature display (4).
• For continuous use, select the desired temperature setting between 1 (min) and 5 (max) by pressing the
temperature button (7) (Fig. [C]) until the desired temperature lights up in orange on the temperature display
(4).
AUTO SHUT-OFF FUNCTION
The throw blanket has an automatic shut-off system. You can set the time between 1 hour or 9 hours.
TIMER – press the timer selector (6) (Fig. [C]) until 1 hour or 9 hours light up in green (5).
AUTO SHUT-OFF – then the timer stops, the throw blanket will automatically turn off and the standby display (8)
(Fig. [C]) will light up in blue.
DISCONNECTION
• Select the OFF position on the back of the control unit (9) (Fig. [C]).

USING THE PRODUCT VIA THE BLUETOOTH

Tenacta Group S.p.A. hereby declares that this throw complies with the essential requirements and other pertinent
provisions set forth by directive 1999/5/EC. The DC is provided at the end of the manual in original language.
Transmission frequency: 2402.00-2480.00 MHz
Compatible with Bluetooth® Low Energy (4.0) appliances and Android 4.4 operative systems or later and iOS 8 or
later.

SYMBOLS

Standby
Off position
On position
®
Bluetooth activation signal
®
®
EN
9