Proper Use - Trumpf N 500 - 4 Manual Del Usuario

GB
1 Die carrier
2 Punch guide
7 Die
10 Punch
12 Gear housing
15 Locking lever
(= to clamp the
die carrier)
26 Handle
N i b b l e r N500-4
N500-4 specifications
Max. material thickness:
•
Steel up to 400 N/mm²
•
Steel up to 600 N/mm²
•
Steel up to 800 N/mm²
•
Aluminium 250 N/mm²
Smallest radius for curve-shaped cutouts
Sectional sheets (90°): in. bending radius min. 8 mm
Starting hole ∅ for die
Cutting track width
Working speed
Nominal power consumption
Number of strokes at nominal load
Weight
Protective insulation
Noise / Vibration
Measured values established in acc. with EN 50 144.
The A-weighted sound level of the unit is typically
77 dB (A). The noise level can exceed 85 dB (A) du-
ring operation.
Wear ear protection!
The weighted acceleration is typically 3.6 m/s².
E296.doc
26
12
2
10
7
1
5.0 mm
3.2 mm
2.5 mm
7 mm
90 mm
min. 41 mm
8 mm
approx. 1.4 m/min
1100W
600/min
3.8kg
Class II
N 500 - 4
15

Proper use

The TRUMPF Nibbler N500-4 is an electrically ope-
rated hand machine used to
•
part plate-shaped workpieces made of material
such as aluminium, non-ferrous heavy metal and
plastic
•
cut tubes and work sheets with bent profiles or
bent sheets, e.g. tanks, crash barriers, troughs,
etc.
•
to nibble straight or curved outer edges and inside
cutouts
•
to nibble according to a scribed line or template
•
to nibble using a circular or straight guide (optio-
nal)
Nibbling produces undistorted cutting edges.
Fig. 9908
9
GB