Before first use
Before first use
Check scope of supply
1. Remove all parts from the packaging and carefully remove all the packaging
material.
2. Check that the delivery is complete.
3. Check that the device and its individual parts show no visible damage. If this is the
case, do not use the device. In this case, contact the dealer where you bought the
device.
4. Clean the device and the pasta dryer before using them for the first time:
Pasta machine:
− Clean the device with a dry cloth or the included cleaning brush.
− Run some pasta dough through the pasta rollers and the cutting rollers to
remove any dust deposits (see "Making pasta"). This pasta dough should
subsequently be disposed of and should not be consumed.
Pasta dryer:
− Wipe the pasta dryer and its parts with a slightly damp cloth.
Setting up the pasta machine
18
1. Insert the table clamp
into the opening on
the side of the pasta
machine.
2. Tighten the thumb screw
firmly counter-clockwise.
The pasta machine must
be firmly attached to the
worktop.
3. Insert the crank into the
opening on the side of
the pasta machine.
KG 2102 manual pasta machine