General Description; Extent Of The Delivery; Overview; Functional Description - Deltafox DP-CDR 2013 Traducción Del Manual De Instrucciones Original

GB

General description

The illustration how to handle the appli-
ance can be found on page 3.

Extent of the delivery

Carefully unpack the appliance and
check that it is complete:
- Cordless Drill
- Battery-charger
- Battery
- Accessories:
3 drills for metal Ø 4/6/8 mm
3 drill bits for stone Ø 4/6/8 mm
3 drills for wood Ø 4/6/8 mm
24 Bits - 25mm (2x PH0-1-2-3,
2x PZ1-2-3, 2 x SL4-5-6-7, T20-25)
1 Magnetic holder
- Storage case
- Instruction Manual charger and bat-
tery
- Instruction Manual

Overview

1 Drill chuck aperture
2 Keyless drill chuck
3 Torque adjustment ring
4 Speed selector
5 Direction of rotation switch
6 Metal belt clip
7 Battery
8 Battery release button
9 On/off switch
10 LED working light
11 Accessories
12 Storage case
13 Battery Indicator
14 Button for charge status display
15 Charger
18

Functional description

The cordless drill with two-speed gearing
has a 21+1 level torque adjustment, left/
right running, a removable keyless chuck
and an LED working light.

Technical data

Cordless Drill ................... DP-CDR 2013
Motor voltage U ............................ 20 V
Idling speed n
0
1st gear ............................... 0-400 min
2nd gear .............................0-1500 min
Maximum torque ............................ 45 Nm
Span-chuck .................................1-13 mm
Weight (without battery charger) .... 1.5 kg
Drilling capacity
for wood ............................ max. 30 mm
for steel ..............................max. 13 mm
Sound power level
(L )......................89.9 dB(A), K
pA
Sound power level
(L ) .................... 99.9 dB(A); K
WA
Vibration (a )
h
max. ................. 1.746 m/s
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration
of conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
-1
-1
= 3 dB
pA
= 3 dB
WA
; K= 1.5 m/s
2 2