Safety Instructions; Symbols And Icons; General Safety Instructions For Power Tools; Work Area Safety - Deltafox DP-CDR 2013 Traducción Del Manual De Instrucciones Original

which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched off
and times when it is switched on but
running without any load).

Safety instructions

Read all safety information
marked with the
well as all instructions.

Symbols and icons

Symbols on the appliance:
Carefully read these operating in-
structions.
Electrical appliances must not be
disposed of with the domestic
waste.
Symbols in the manual
Warning symbols with informa-
tion on damage and injury pre-
vention.
hazard symbol with information
on the prevention of personal
injury caused by electric shock.
Instruction symbols with informa-
tion on preventing damage.
Help symbols with information on
improving tool handling.
General safety instructions for
power tools
Retain all safety directions and in-
structions for future use.
The term „power tool" in the warnings re-
symbol as fers to your mains-operated ((with power
line) power tool or battery-operated
(without power line) power tool.

1) WORK AREA SAFETy

a) Keep work area clean and well lit.
b) Do not operate power tools in ex-
c) Keep children and bystanders

2) ELECTRiCAL SAFETy

a) Power tool plugs must match the
READ ALL SAFETy nOTiCES,
inSTRUCTiOnS, iLLUSTRA-
TiOnS AnD TEChniCAL DATA
ThAT hAVE BEEn PROViDED
WiTh ThiS POWER TOOL.
Omissions in the compliance with
safety directions and instructions
can cause electrical shock, fire
and/or severe injuries.
Cluttered or dark areas invite acci-
dents.
plosive atmospheres, such as in
the presence of flammable iiquids,
gases or dust. Power tools create
sparks which may ignite the dust or
fumes.
away while operating a power tool.
Distractions can cause you to lose
control of the power tool.
Caution:
To avoid accidents and injuries
due to electric shock:
outlet. never modify the plug in
GB
19