Introduction; Intended Purpose - Deltafox DP-CRH 2011 Traducción Del Manual De Instrucciones Original

Content
Introduction ..........................................19
Intended purpose ................................19
General description .............................20
Extent of the delivery ....................... 20
Overview .......................................... 20
Functional description...................... 20
Technical data ......................................20
Safety instructions ..............................21
Symbols and icons .......................... 21
General safety instructions
for power tools ................................. 21
Initial start-up ......................................26
Checking the battery charge level ... 26
Inserting/removing the device's
battery pack ..................................... 26
Selecting a tool ................................ 26
Changing the tool ............................ 26
Inserting an SDS Plus tool ............... 27
Removing an SDS Plus tool ............. 27
Inserting tools with hexagonal and
cylindrical shafts .............................. 27

Introduction

Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has
been checked for quality and subjected
to a final inspection. The functionality of
your equipment is therefore guaranteed.
The operating instructions con-
stitute part of this product. They
contain important information on
safety, use and disposal. Before us-
ing the product, familiarise yourself
with all of the operating and safety
instructions. Use the product only
as described and for the applica-
tions specified.
Removing tools with hexagonal
and cylindrical shafts ....................... 27
Removing the keyless chuck ........... 27
Operation ..............................................27
Selecting the operating mode .......... 27
Set the direction of rotation ............. 28
Switching on/off ............................... 28
Cleaning and maintenance .................28
Cleaning ........................................... 28
Maintenance .................................... 28
Storage .................................................28
Disposal and protection of the
environment .........................................29
Guarantee .............................................29
Repair Service......................................29
Trouble shooting ..................................30
Replacement parts/accessories ........30
Translation of the original EC
declaration of conformity ...................122
Exploded Drawing .............................130
Service Center ...................................131
Keep this manual safely and in the
event that the product is passed
on, hand over all documents to the
third party.

Intended purpose

The device is intended for impact drilling
into brick, concrete and rock, as well as
for non-impact drilling into wood, metal,
ceramic and plastic. Electrical tools with
electronic regulation and right/left-hand
rotation are also suitable for screwing.
Any other use that is not explicitly ap-
proved in these instructions may result in
damage to the equipment and represent
a serious danger to the user.
GB
19