Safety Instructions For Hammer Drills; Additional Safety Instructions - Deltafox DP-CRH 2011 Traducción Del Manual De Instrucciones Original

GB
from paper clips, coins, keys, nails,
screws and other small metal ob-
jects, which could cause bridging
of the contacts. A short circuit be-
tween the battery contacts may cause
burns or fire.
d) If used incorrectly, liquid may leak
from the battery. Avoid contact
with this. In the event of accidental
contact, rinse off with water. If the
liquid gets into eyes, seek medical
assistance. Leaking battery fluid may
cause skin irritations or burns.
6) SERVICE
a) Have your power tool serviced by
a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained.
7) SAFETy InSTRUCTIOnS FOR
HAMMER DRILLS
• Wear ear protection. Exposure to
noise can cause hearing loss.
• Use the additional handle, which is
integrated in the device. Loss of con-
trol can result in injuries.
• Hold the appliance by the insulated
gripping surfaces when performing
work in which the tool may come into
contact with hidden wiring. Contact
with a live wire can also cause a
charge in metal parts of the appli-
ance and result in an electric shock.
24

Additional safety instructions

6)
TRAInInG
• The appliance is not suitable for use
by children. Children should be su-
pervised to ensure that they do not
play with the appliance. Cleaning and
user maintenance shall not be made
by children.
• This appliance is not intended for use
by persons with reduced physical,
sensory or mental capabilities, or lack
of experience and knowledge.
• Local regulations or bylaws may de-
termine the minimum age for using
the device.
• The operator or user is responsible
for accidents or damage to other per-
sons or their property.
• Children and persons with limited
physical, sensory or mental capabili-
ties or inadequate experience and
knowledge, or persons who are not
familiar with the instructions, should
never be allowed to use the machine!
Local regulations may specify an age
limit for the user.
• Never let children or persons who are
not familiar with the instructions men-
tioned use the machine.
PREPARATIOn
• Before each use, carry out a visual
inspection on missing or wrongly
mounted protective devices or parts of
the cutting device.
• Before commissioning and after any
impacts, check for signs of wear and
damages, and have any necessary re-
pairs performed.