Troubleshooting; Service Data - Zanussi ZOB25602 Manual De Instrucciones

Ocultar thumbs Ver también para ZOB25602:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CAUTION!
Always hold the halogen lamp with a
cloth to prevent grease residue from
burning on the lamp.
1. Deactivate the appliance.
2. Remove the fuses from the fuse box or
deactivate the circuit breaker.

Troubleshooting

WARNING!
Refer to Safety chapters.
What to do if...
Problem
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The lamp does not operate.
Steam and condensation settle
on the food and in the cavity of
the oven.
The display shows "12.00".

Service data

If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
16
Possible cause
The oven is deactivated.
The clock is not set.
The necessary settings are not
set.
The fuse is released.
The lamp is defective.
You left the dish in the oven for
too long.
There was a power cut.
We recommend that you write the data here:
The back lamp
1. Turn the lamp glass cover counterclockwise
to remove it.
2. Clean the glass cover.
3. Replace the lamp with a suitable 300 °C
heat-resistant lamp.
4. Install the glass cover.
Activate the oven.
Set the clock.
Make sure that the settings are
correct.
Make sure that the fuse is the
cause of the malfunction. If the
fuse releases again and again,
contact a qualified electrician.
Replace the lamp.
Do not leave the dishes in the
oven for longer than 15 - 20 mi-
nutes after the cooking process
ends.
Reset the clock.
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove
the rating plate from the appliance cavity.
.........................................
.........................................
.........................................
Remedy
www.zanussi.com

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido