Denon DJ PRIME SC6000M Guia Del Usuario página 20

Tap the gear icon in the top-right corner of the touchscreen to open the Engine Lighting settings.
General
• Engine Lighting Status: This setting displays the current
connection status to Engine Lighting devices. When Running
is shown, Engine Lighting is active. Tap Stop to deactivate
Engine Lighting. Tap Start to reactivate.
• Connection Status: These indicators will show whether
Engine Lighting is receiving signal from up to four connected
players.
• Sync Offset: Use this slider to apply a time offset for syncing
your connected lights, from -1 to 0 to +1 seconds.
• Show Advanced Controls: Enable this option to toggle
between the Basic and Pro controls (see right).
• Randomize Autoloops: This setting determines whether
autoloops are randomized or play in order.
• Override Scripted Tracks: This setting determines whether
a scripted track that is paired with an audio file is used (Off)
or whether you can override it using the onboard controls
(On).
• Loop Auto Strobe: This setting allows you to automatically
generate strobe effects when a Loop Roll is engaged.
• Broadcast Art-Net: This setting allows you to enable or
disable sending Art-Net protocol to control DMX interfaces
over a network connection.
• Strobes: This setting determines whether strobe effects are
enabled or disabled.
• Philips Hue: Enable this option to connect to available
Philips Smart Hue devices.
• Player Mode: This setting allows you to set whether you are
using 2 Player or 4 Player operation.
• Active Faders: This setting allows you to enable or disable
Engine Lighting control on up to four channels at a time. Tap
the CH1–CH4 names to activate each channel.
DMX Interfaces
Use this menu to view connected DMX interfaces and their Universe Assignments.
Philips Hue
Use this menu to set up Philips Hue devices.
20
Basic View
Pro View