Symbols - Stiga BL 48 Li Manual De Instrucciones

impact; this waste must not be disposed of
as normal waste, it must be separated and
taken to specified waste disposal centres
where the material will be recycled.
• Scrupulously comply with local regulations for
the disposal of waste materials after mowing.
• At the time of decommissioning, do not
pollute the environment with the machine,
but hand it over to adisposal centre, in
accordance with the local laws in force.
POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer
at the rate for which it was designed
• Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch
is dangerous and must be repaired.
• Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk
of starting the power tool accidentally.
• Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment
or binding of moving parts, breakage
of parts and any other condition that
may affect the power tool's operation. If
damaged, have the power tool repaired
before use. Many accidents are caused
by poorly maintained power tools.
• Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
• Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the
power tool for operations different from those
intended could result in a hazardous situation.
• pericolo, utilizzare l'apparecchio elettrico
solo per i lavori per cui è stato progettato.
BATTERY TOOL USE AND CARE
• Recharge only with the charger specified by
the manufacturer. A charger that is suitable
for one type of battery pack may create a risk
of fire when used with another battery pack
• Use power tools only with specifically
designated battery packs. Use
of any other battery packs may
create a risk of injury and fire.
• When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from
one terminal to another. Shorting the battery
terminals together may cause burns or a fire
• Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from
the battery may cause irritation or burns
SERVICE
• Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
SAVE THESE INSTRUCTIONS.
REFER TO THEM
FREQUENTLY AND USE THEM TO INSTRUCT
OTHERS WHO MAY USE THIS UNIT. IF YOU
LOAN SOMEONE THIS UNIT,
LOAN THEM THESE
INSTRUCTIONS ALSO.

2. SYMBOLS

Some of the following symbols may be
used on this tool. Please study them
and understand their meaning.
Proper interpretation of these symbols will
allow you to operate the tool better and safer.
Class II
Double insulation.
Safety Alert!
that involve your safety.
Read the operation manual and
follow all warnings and safety
instructions.
Wear eye protection and ear protection.
Ricochet alert
Thrown objects can ricochet and
result in personal injury or
property damage. Wear protective
clothing and boots.
Keep bystanders away
Keep all bystanders, especially
children and pets, at least
15m from the operating area.
3
Precautions