Description; Assembly - Stiga BL 48 Li Manual De Instrucciones

Impeller Blades
Rotating impeller blades can
cause severe injury.
Wet conditions alert
Do not expose to rain or damp conditions.
The following signal words and meanings
are intended to explain the levels of
risk associated with this product.
ndicates an imminently
DANGER: I
hazardous situation, which, if not
avoided, will result in death
or serious injury.
WARNING: Indicates a potentially
hazardous situation, which, if not avoided,
could result in death or serious injury
CAUTION! Indicates a potentially
hazardous situation, which, if not avoided,
may result in minor or moderate injury.
CAUTION: (Without Safety Alert
Symbol) Indicates a situation that may
result in property damage.

3. DESCRIPTION

1. Handle
2. Variable speed trigger
3. Battery pack (not included))
4. Tasto bloccaggio batteria
5. Tube latch
6. Blower housing outlet
7.Blower tube
8. Nozzle tab
9. Blower tube outlet
10.High speed nozzle
11. ON/OFF switch
12. Acoustic power level according to directive
2000/14/EC
13.Conformity marking according to directive
2006/42/EC
14. Year of manufacture
15. Type of machine
16. Serial number
17. Name and address of Manufacturer
18. Article code
As soon as you have purchased the
machine, do not forget to write the
identification numbers (S/n) in the spaces
on the last page of the manual.
The example of the Declaration of Conformity is
provided on the penultimate page of the manual.
KNOW YOUR BLOWER
See Figure 1.
The safe use of this product requires an
understanding of the information on the blower
and in this operator's manual as well as a
knowledge of the project you are attempting.
Before use of this product, familiarize yourself
BLOWER TUBE
See Figure 1.
The blower tube can be installed
on the blower without

4. ASSEMBLY

To prevent accidental starting that
could cause serious personal injury,
always remove the batterypack from
the blower when assembling parts.
ASSEMBLING THE BLOWER TUBE
See Figure 2.
• With the logo area facing up, slide the blower
tube over the outlet on the blower housing
while pressing down on the tube latch.
• Slide blower tube over housing outlet until
the tube latch locks into place through
the opening in the blower tube.
• For clearing wet leaves or heavier debris,
install the high speed nozzle by connecting it
to the blower tube outlet. Make sure the nozzle
snaps over the nozzle tab to secure it in place.
OPERATION
Do not allow familiarity with tools
to make you careless. Remember
that a careless fraction of a second is
sufficient to inflict serious injury.
INTENDED USE
You may use this tool for the
purposes listed below:
• Pulizia di superfici dure come gli
accessi ai garage o i marciapiedi.
• Rimuovere foglie, aghi di pino e altri piccoli
detriti da vialetti, garage e portici.
Not intended for use other
than what is listed above.
For complete charging instructions,
refer to the Operator's Manuals for your
battery pack andcharger models.
4