Care And Maintenance; Battery Safety Instructions - Levenhuk 400 Serie Guia Del Usuario

Ocultar thumbs Ver también para 400 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 29
Caution! Please remember that mains voltage in most European countries is 220—240V. If you want to use your device
!
in a country with a different mains voltage standard, remember that use of a converter is absolutely necessary.

Care and maintenance

Never, under any circumstances, look directly at the Sun, another bright source of light or at a laser through this device, as
this may cause PERMANENT RETINAL DAMAGE and may lead to BLINDNESS. Take necessary precautions when using the device
with children or others who have not read or who do not fully understand these instructions. After unpacking your microscope
and before using it for the first time check for integrity and durability of every component and connection. Do not try to
disassemble the device on your own for any reason. For repairs and cleaning of any kind, please contact your local specialized
service center. Protect the device from sudden impact and excessive mechanical force. Do not apply excessive pressure when
adjusting focus. Do not overtighten the locking screws. Do not touch the optical surfaces with your fingers. To clean the device
exterior, use only special cleaning wipes and special optics cleaning tools from Levenhuk. Do not use any corrosive or acetone-
based fluids to clean the optics. Abrasive particles, such as sand, should not be wiped off lenses, but instead blown off or
brushed away with a soft brush. Do not use the device for lengthy periods of time, or leave it unattended in direct sunlight.
Keep the device away from water and high humidity. Be careful during your observations, always replace the dust cover after
you are finished with observations to protect the device from dust and stains. If you are not using your microscope for extended
periods of time, store the objective lenses and eyepieces separately from the microscope. Store the device in a dry, cool place
away from hazardous acids and other chemicals, away from heaters, open fire and other sources of high temperatures. When
using the microscope, try not to use it near flammable materials or substances (benzene, paper, cardboard, plastic, etc.), as
the base may heat up during use, and might become a fire hazard. Always unplug the microscope from a power source before
opening the base or changing the illumination lamp. Regardless of the lamp type (halogen or incandescent), give it some time
to cool down before trying to change it, and always change it to a lamp of the same type. Always use the power supply with the
proper voltage, i.e. indicated in the specifications of your new microscope. Plugging the instrument into a different power outlet
may damage the electric circuitry of the microscope, burn out the lamp, or even cause a short circuit. Children should use the
device under adult supervision only. Seek medical advice immediately if a small part or a battery is swallowed.

Battery safety instructions

Always purchase the correct size and grade of battery most suitable for the intended use. Always replace the whole set of batteries
at one time; taking care not to mix old and new ones, or batteries of different types. Clean the battery contacts and also those of
the device prior to battery installation. Make sure the batteries are installed correctly with regard to polarity (+ and −). Remove
batteries from equipment that is not to be used for an extended period of time. Remove used batteries promptly. Never short-
circuit batteries as this may lead to high temperatures, leakage, or explosion. Never heat batteries in order to revive them. Do
not disassemble batteries. Remember to switch off devices after use. Keep batteries out of the reach of children, to avoid risk of
ingestion, suffocation, or poisoning. Utilize used batteries as prescribed by your country's laws.
Levenhuk International Lifetime Warranty
All Levenhuk telescopes, microscopes, binoculars and other optical products, except for accessories, carry a lifetime warranty
against defects in materials and workmanship. Lifetime warranty is a guarantee on the lifetime of the product on the market.
All Levenhuk accessories are warranted to be free of defects in materials and workmanship for six months from date of retail
purchase. The warranty entitles you to free repair or replacement of the Levenhuk product in any country where a Levenhuk
office is located if all warranty conditions are met.
For further details please visit our web site: www.levenhuk.com/warranty
If warranty problems arise, or if you need assistance in using your product, contact the local Levenhuk branch.
13

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

400m400b400tD400tD400 lcd

Tabla de contenido