Yakima BasketCase Manual De Instrucciones página 2

Do you have - RouND - squaRe - FaCToRy CRossbaRs - oR WhispbaR ?
aTTach SnaParoundS or MIghTyMounTS.
yakIMa
round barS:
attach 2 Snaparounds
onto each crossbar.
unIVerSal
MightyMount
#03590
FacTory, whISPbar or SQuare barS reQuIre The
baSkeT To SIT aboVe The rack.
This may be best for some round bars too,
depending on the crossbar spread.
MeaSure The dISTance
beTween The barS.
12" croSSbar SPread:
Basket must be positioned
as in A.
More Than
12" croSSbar SPread:
Try the orientations as in B or C.
(Round bars also see below).
round barS enable the basket to sit
below the crossbars.
Some accessories can be
attached to the crossbars
when BasketCase is
installed below the bars.
Choose the best orientation for
your crossbar spread.
1030172H - 2/9
SQuare barS:
Loosen the tabs inside the
SnapArounds by bending them
repeatedly, or remove the tabs
with scissors or pliers.
attach 2 Snaparounds
onto each crossbar.
Follow the universal MightyMount
instructions for MightyMount
assembly and refer to this instruction
for gear mount installation.
A
B
C
D
E
MIghTyMounTS:
MightyMounts purchased
separately (refer to the
YAKIMA Fit List for correct
MightyMounts for your
vehicle).
attach 2 MightyMounts
onto each crossbar,
according to
MightyMount
instructions.
Be sure the bolts pass
through the wire loops on the
bottom of the basket.
hex keys or bolts.
Be sure the bolts pass
through the wire loops on the
SIdeS of the basket.
Snaparounds may face up or down, but the
bolt must alwayS be at the top of the loop.
TIghTen heX keyS.
TIghTen