Scope Of Delivery; Functional Description - Abicor Binzel BRS-CC Instructivo De Servicio

Unidad de mantenimiento
Ocultar thumbs Ver también para BRS-CC:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

BRS-CC

3 Scope of delivery

• Completely mounted maintenance station BRS-CC
• Anti-spatter fluid (1 litre bottle)
• 1 distance sleeve for gas nozzles with nominal diameter up
to 15.5
• Operating instructions
Tab. 11
Scope of delivery
NOTE
A clamping prism and a milling cutter are required for the first equipment and the functionality of the
maintenance station. They depend on the torch and gas nozzle geometry.
Order the equipment parts and wear parts separately. Order data and part numbers for the equipment parts
and wear parts can be found in the current ABICOR BINZEL spare parts and wear parts lists.
The contact for consulting and ordering can be found in the Internet at www.binzel-abicor.com.
3.1 Transport
The components are carefully checked and packaged, however damage may occur during shipping.
Checking procedure on receipt of
goods
In case of damage
In case of complaints
Packaging for returning the goods
Transport
Tab. 12
3.2 Storage
Physical storage conditions in a closed room:
 Tab. 2 Temperature on page EN-3

4 Functional Description

For cleaning, the torch is clamped with the cylindrical part of the gas nozzle in the clamping device. The
milling cutter which is configured to the gas nozzle and torch geometry moves into the gas nozzle interior
by means of compressed air and removes adhering welding spatter there. The cleaning process is optimized
by an air-blast function (option) through the cable assembly.
Afterwards, the cleaned gas nozzle interior is sprayed by the milling cutter with a dosed quantity of anti-
spatter fluid against adhesion of spatter. In the wire cutting device (DAV), the welding wire is cut to TCP
length. A clamp for strain relief of the connection between control system and cleaning unit is integrated in
the housing.
• Connection kit with non-return valve
• Empty bottle
• 1 distance sleeve for gas nozzles with nominal diameters from
16 to 19
Make sure that the shipment is complete by referring to the delivery note!
Check the package and components for damage (visual inspection)!
If the goods have been damaged during transport, contact the last carrier immediately!
Keep the packaging for possible checks by the carrier.
Use the original packaging and the original packaging material. If you have questions
concerning the packaging and safety during shipment, please consult your supplier.
3 Scope of delivery
EN - 6

Publicidad

Tabla de contenido
loading

Tabla de contenido