Installing The Monitor; Connections - Avidsen 112282 Manual Del Usuario

C - INSTALLATION

2 - INSTALLING THE MONITOR

Attach the wall mount to the wall using the screws and wall plugs suited to the support (the screws and
plugs supplied are suitable for solid walls).
After connecting the monitor (refer to the "connections" paragraph), fit the monitor onto its support.

3 - CONNECTIONS

• Do not increase the number of insulating screw joints or connectors on the connecting wire between
the intercom panel and the monitor
• Keep the connecting wire between the intercom panel and the monitor more than 50 cm away from any
electromagnetic
interference (230 V cable, WiFi device, microwave ovens, etc.)
• You can connect and use the electric strike plate (not provided) with your intercom panel, with or
EN 10