Mopar K6861936 Manual De Instrucciones página 2

REMOVAL
1. Raise and support the vehicle. (Refer to owner's manual.)
2. Remove the wheel mounting bolts, then the tire and wheel assembly.
3. Remove the two brake caliper adapter bolts (2)
The bolts are one time use and need
NOTE:
to be discarded.
4. Remove the disc brake caliper and adapter as an
assembly and hang it out of the way using wire or a
bungee cord. Use care not to overextend the brake
hose when doing this.
5. Remove the brake line connector (6) from the junction
on the inner fender.
6. Separate the brake line locator (5) from the strut and
remove the brake hose from the strut.
Remove the rotor retaining bolt (3) and remove the
7.
rotor (4) from the hub and bearing.
5
/15
6
3
4
K6861936