Mopar K6861936 Manual De Instrucciones página 4

4
16. Place the line locating feature into the line locating
bracket.
17. Install the brake line to the to the hardline.
Screw the fitting a few turns by hand to engage
the threads.
18. Use a wrench to hold the brake line fitting in place, while
a flare wrench to tighten the hard line fitting.
19. Remove caliper bridge (9) and install pads.
20. Reinstall caliper bridge and torque bridge bolts (10) to
14 N·m (10 ft-lbs).
21. Bleed the entire system as per the service manual
22. Install the tire and wheel assembly.
23. Lower the vehicle.
24. Progressively tighten all wheel mounting (lug) bolts in
a star pattern to the following specifications:
Steel wheels: 120 N·m (89 ft-lbs)
Aluminum wheels: 125 N·m (92 ft-lbs)
25. Check and adjust the brake fluid level in the reservoir
as necessary.
26. Road test the vehicle and follow bed-in procedure.
/15
9
10
K6861936