Miniland digimonitor 2.4 gold Manual De Instrucciones página 26

ENGLISH
BABY MONITOR option on the PC on which you wish
to see the remote image.
3. Select the digimonitor 2.4'' plus from the different
models of baby monitor.
4. There are two options to choose from. Choose
"View from anywhere with an internet connection,
wherever you are, on another computer, tablet or
smartphone".
5. In order to view the remote image captured on the
camera on your mobile device, click on the Receive
signal button. If everything is working correctly you
should automatically see your baby on the computer
screen. If there is a problem with the image, consult
the online viewing instructions by clicking on the
READ INSTRUCTIONS icon.
Steps to follow if you wish to see the image on a
mobile device (tablet or mobile phone):
eMyBaby application
Miniland has developed the eMyBaby application,
available for iOS and Android and simple and free-of-
charge to download.
The eMyBaby app can be downloaded from the app
store or download it directly by scanning the QR code:
To install the application, follow the instructions at the
beginning of this instruction manual.
1. Once you have installed the application, open
7. TROUBLESHOOTING
Problem
No reception on the
monitor
No reception on the
monitor
Only black and
images are displayed
Possible Cause
Camera not turned on
Monitor not turned on
Camera: not plugged in to the
power adapter
Monitor: The power adapter is not
plugged
Monitor out or range
Connection lost
monitor and a camera already
linked
A wrong camera has been selected Change the camera number you are
white Check whether the camera is in
night vision/infrared mode
it. Click on LOG IN and enter your username and
password if you are already registered, or register if
you are not. Remember you will receive a message of
confirmation at the e-mail address you provided when
registering.
2. Select the BABY MONITOR option on the main
menu.
3. Select the digimonitor 2.4'' plus from the different
models of baby monitor.
4. Click on the PLAY
by the camera on your mobile device.
Mobile browser
You can also view the camera image by accessing
the eMyBaby website via the browser on your mobile
device. This option will be particularly useful if your
mobile device is not iOS or Android.
1. Access the eMyBaby (www.emybaby.com) website
on your browser using your username and password.
Select the BABY MONITOR option on the main menu.
2. Select the digimonitor 2.4'' plus monitor from the
different models of baby monitor.
3. There are two options to choose from. Choose
"View from anywhere with an internet connection,
wherever you are, on another computer, tablet or
smartphone".
4. Click on the Receive signal button. If everything is
working correctly you should automatically see your
baby on your mobile screen.
6. MAINTENANCE
• Clean the surfaces of the camera and monitor with a
soft, lint-free cloth.
• If the units become dirty, use a lightly dampened
cloth to wipe surfaces, taking care to not allow water
into any openings.
• Never use cleaning agents or solvents.
Solution
Press and hold down button (III) for 2
seconds
Press and hold down the Power button (12)
Plug in the power adapter
Plug in the power adapter
Move the monitor closer to the camera
between the Link the camera with the monitor again. See
5.2.9.1.4
watching. See 5.2.9.1.1
In order to view the images in colour,
increase the level of light in the room the
camera is in or check there is nothing
covering the camera´s light sensor (II)
26
icon to see the image captured