Other Functions - Mhouse Kit RMEN Instrucciones Y Advertencias Para La Instalación Y El Uso

The STX1 transmitter has a support in order that it can be mounted, to a wall
for example. Adhesive tape can be used if the surface is smooth and solid,
otherwise the special screw and screw anchor supplied.
9.9 - Locking or unlocking the RMEN memory
This procedure enables the user to lock and unlock the RMEN memory to prevent accidental memorisation of other transmitters not envisaged on the system.
1
01. Press and hold the key ■ (for approx. 5 seconds), until the motor performs 1 VIBRATION; then release the key.
02. Press and hold the keys ▲ and ▼ (for approx. 5 seconds), until the motor performs 4 SHORT mo tions; then release the key.
03. Then:
• to LOCK the memory, press key ▲ once;
• to UNLOCK the memory, press key ▼ once;
The motor then completes 3 LONG motions (= memory locked/unlocked).
Caution! – If the memory is Blocked, and the user attempts to memorise a Transmitter, the motor performs 1 SHORT motion (= memory blocked) in
place of the usual 3 LONG motions envisaged in the transmitter memorisation procedure.
9.10 - Total deletion of the memory and restoring factory settings
Caution! – This procedure deletes all data in the RMEN memory, including positions "0", "1", functions and codes of memorised transmitters.
The procedure can be performed with a memorised transmitter or one that is not.
• With a transmitter already memorised:
1
01. Press and hold the key ■ (for approx. 5 seconds), until the motor performs 1 VIBRATION; then re lease the key.
02. Press and hold the key ▲ until the motor performs 3 LONG motions; then release the key precisely on the third motion.
03. Press and hold the key ■ until the motor performs 3 LONG motions; then release the key precisely on the third motion.
04. Press and hold the key ▼ until the motor performs 3 LONG motions; then release the key precisely on the third motion.
05. (within the next 2 seconds) Press keys ▼ and ▲ simultaneously and then release.
After a few seconds the motor completes 5 LONG motions (= Memory deleted).
• With a transmitter not yet memorised:
OFF ON
1
01. Disconnect the motor from the power supply (if connected) and then reconnect. Within the next 60 seconds, press and hold the key ■, until the motor per-
forms 1 VIBRATION; then release the key.
02. (within the next 5 seconds) Disconnect and reconnect the motor from the power supply again. Within the next 60 seconds, perform the remaining points of
this procedure.
03. Press and hold the key ■ until the motor performs 1 VIBRATION; then release the key.
04. Press and hold the key ▲ until the motor performs 3 LONG motions; then release the key precisely on the third step.
05. Press and hold the key ■ until the motor performs 3 LONG motions; then release the key precisely on the third step.
06. Press and hold the key ▼ until the motor performs 3 LONG motions; then release the key precisely on the third step.
07. (within the next 2 seconds) Press keys ▼ and ▲ simultaneously and then release.
After a few seconds the motor completes 5 LONG motions (= Memory deleted).
7 – English
STX1 transmitter (installation)

Other functions

= =
4
(1- 2 -3) (1- 2 -3)
OFF ON
(1- 2 -3)
(1- 2 -3)
(1- 2 -3) (1- 2 -3)
5
5