Description Of The Appliance; Identification Data; How To Make Coffee - ARIETE Moka aroma 1337 Manual De Instrucciones

descrIpTIon oF The ApplIAnce

A - Machine body
B - Cup-resting grill
C - Drip tray
D - Power cord + Plug
E - Maxi Cappuccino attachment and wand for
water and steam supply
F - Water tank
G - Filter holder for ground coffee
H - Powder dripper
I - Thermocream® disc
L - 2-cup coffee filterr
M - Coffee measure/presser

Identification data

The following machine identification data are shown on the plate placed underneath the machine's standing
base:
• manufacturer and CE mark
• model (Mod.)
• serial number (SN)
• electrical supply voltage (V) and frequency (Hz)
• absorbed electric power (W)
• assistance toll-free number
Always give the model and serial number to the Authorised Service Centres when requesting assistance.
prelImInAry phAses For use
using the appliance for the first time
Check that the voltage of the domestic network is the same as that indicated on the technical information plate
of the appliance. Place the appliance on a stable surface.
Open the tank lid (Z). Fill the tank up to the level marked MAX (Fig. 3).
While filling, pay close attention that the water does not dampen the switch area to prevent infiltrations inside the
electrical parts.
Insert the plug into the socket, which must be earthed.
starting the first time
After having filled the tank with cool tap water, start the machine by pressing the button (O). The light (N) will
turn on to indicate that the machine is on. Wait for the light (S) to turn on. The machine is ready to make coffee.
Press the coffee dispensing switch (R) until you see water come out of the filter holder seat (Fig. 4).
if you are starting the machine for the first time or after a period of time during which it has not been used, it is
recommended that at least one cup of water be allowed to pass through the boiler's hydraulic circuit. also open
the cock (p) by slightly turning it anti-clockwise after having placed a container underneath the maxi Cappuccino
device wand (e).
Then close the cock (P) by turning it clockwise, and press the coffee dispensing switch (R) to make the water
stop coming out. Wait for the light (S) to turn on. The machine is ready to make coffee. The machine will be
ready to make coffee when the indicator lamp (S) turns off.

hoW To mAke coFFee

In the filter holder insert: the dripper (H), the Thermocream® disc (I) and the 2-cup coffee filter (L) in the order
shown (Fig. 5). Measure out the coffee in the filter and lightly press with the specially provided presser: com-
pletely fill two measures for two cups of coffee, and fill only one for one cup. Insert the filter holder into its seat.
N - "On" indicator light
O - On/Off button
P - Steam dispensing cock
Q - Coffee dispensing indicator lamp
R - Coffee dispensing switch
S - Boiler temperature indicator lamp
T - Steam function switch
U - Pod filter holder
V - Pod filter
W - Pod dripper
Z - Tank cover
15