Astralpool R3 Guia De Inicio Rapido página 14

,
Operating the pool cleaner - Power button
Important Tips
• Shut off and unplug the power supply every time you remove the cleanerlrom the water.
• It is recommended to clean the filter after every cycle.
• Periodically straighten out the floating cable.
• Save your
cleane~s
packaging lor off-season storage or lor shipping the unit to your
dealer if service is required.
13
a.PowerLEO
The blue LED flashes when the power supply is in standby mode and lights
continuously when the pool cleaner is operating.
b. "POWER" button
The button switches between 'ON' and 'STANDBY'.
IMPORTANT -Afterevery cycle the pool cleaner will automatically go to 'standby'.
In case you want to turn the machine off during the working cycle, press the
'powe~ button once and the LED will start flashing, indicating that the machine
has stopped running.
• 00 not leave your cleaner in direct sunlight when nol in use.
• Never leave the power supply in direcl suntight and avoid leaving it in the
rain.
• Occasionally, you should rinse your cleaner in clean, Iresh water. This will
lengthen the service lile olyour cleaner.
Clean the propeller once a month