Bissell POWERTRAK 1307 Serie Guia Del Usuario página 8

Operations
Empty Dirt Tank
For best performance, empty when the dirt
reaches the full line on the container.
1. Turn POWER OFF and unplug from outlet
2. Remove tank by pressing the release button
on the tank handle.
3. Visually check the pre-motor filter located 2. 3.
directly under the dirt tank. If there is debris, fol-
low filter instructions in the maintenance section.
4. Grasp handle on back of the tank with one
hand and the top handle with the other.
5. Over a trash container, twist the top handle
counterclockwise until the latches release.
6. Pull the top handle piece straight from the
dirt tank. Empty contents of dirt tank into trash
container, and gently shake the top handle piece
to remove build up.
4-6
7.
NOTE: If you notice excess build up around the
top of the tank, before removing top piece,
gently tap the tank to allow contents to settle.
7. Place the top handle piece straight downward
into the dirt tank. Align the latch arrows and
gently twist clockwise. When fully assembled,
the tank will click into place.
8. Replace the tank back onto the vacuum – the
tank will click into place when fully installed.
www.BISSELL.com
8