Crevice Tool; Extension Wand - Bissell POWERTRAK 1307 Serie Guia Del Usuario

Operations
Tools
With the vacuum in upright position, remove
the lower hose end from the foot of the vacuum
and from both hose clips. Attach desired tool by
firmly inserting the tool into the hose end.
TurboEraser™ Tool (select models)
Remove tool by pulling away and downwards
from vacuum.
Use rotation brush action for small flat areas
such as stairs and cushions. Press gently down
and pull towards you in raking motion; too much
pressure will cause brush to stop rotating. The
brush easily stores on the handle.

Crevice Tool

Located on the back of the vacuum, use in
tight narrow spaces

Extension Wand

Attach with desired tool for longer reach.
Long Reach Dusting Tool (select models)
This tool does not store on-board. Use this tool
for dusting large surfaces.
www.BISSELL.com
7