Tabla de contenido
Publicidad
red
rouge
rojo
1
2
English
Installation
For proper operation of the faucet, the hot valve
must be on the left, and the cold valve must be on
the right.
Install the mounting nut, metal washer, and fiber
washer on the valve.
Push the valve up through the hole in the mounting
surface (1).
Install the stop ring and mounting ring (2).
Rest the valve on the mounting surface (1).
Tighten the mounting nut and the tensioning
screws (2).
Turn the valve stems to the "off" position.
Publicidad
Tabla de contenido
