Cosatto Nitty Gritty PORT Manual De Usuario página 9

Raincover
14
Fitting
15
Accessing handle
Removing softgoods
16
12
Remove hood .
3 (1).
Loosen the shoulder straps
Disconnect shoulder straps from harness connector (2).
Pull shoulder straps out of seat (3) and chest pads (4).
Push crotch strap clip through seat (5).
Unhook the elastic straps under the side of the seat (6).
Unhook the elastic straps under the front of the seat (7).
Pull seat cover from around the front of seat and release button (8).
17
Lift cover to access waist strap clips (1).
Remove retaining clip (2). Push strap ends through slots in seat (3 & 4).
Remove harness and seat liners (5).
Unhook elastic straps behind handle hinges (6).
Refitting is a reversal of this procedure.
Note: Never remove the backing foam from the child car seat.
Child car seat base (fitted with ISOFIX anchorage points)
18
Location
WARNING: Ensure that your vehicle has ISOFIX anchor points.
Refer to the vehicle list in this manual for information of where the child car seat
base will fit in your vehicle.
19
Fitting the ISOFIX guides
Attach the ISOFIX guides to the vehicle's ISOFIX anchor points (1).