Tabla de contenido
Publicidad
REPEAT PLAYING FUNCTION
Single track repeat
While in playback mode, press the REPEAT button once to repeat the current track. The display
shows as REP.
Single folder repeat
In playback mode, press the REPEAT button twice, all tracks in the current album will be
repeated, the display shows REP, folder number and track number.
Disc repeat
In playback mode, press the REPEAT button 3 times to play all tracks on the disc repeatedly.
The display shows ALL REP.
Random playback
While in playback mode, press the REPEAT button 4 times, RAND appears in the display.
Press the PLAY / PAUSE button to begin random playback.
ALBLUM SETTING
Press the FOLDER UP button to select the desired album
Note: this function is only valid for MP3 discs, which contain the songs in different folders. Select
tracks to playback from the album.
TRACK SEARCH
Press the REW and F.FWD buttons during playback to skip to the desired previous or next
track.
FORWARD / REVERSE SEARCH
Press and hold REW. / F.FWD during playback to scan the track which is being played at high
speed. When the desired section of the current track if found, release the button and normal
playback will resume.
Press and hold the F.FWD button while playing to scan the current track forward at high speed.
Press and hold the REW. while playing to scan the current track backward at high speed.
PROGRAM PLAYBACK
The tracks on the disc can be programmed to play in any order (up to 10 tracks can be
programmed).
Note: this can only be done in stop mode.
Press the PROG. button while in the stop mode, PROG 01 flashes in the display.
Press FOLDER UP to select the desired album, and press REW. / F.FWD to select the
desired tracks in the album, then press PROG. to store in memory.
The first track number is now stored and the program number changes to PROG 02, waiting for your
next selection.
Repeat above steps to program additional tracks.
After programming is finished, press the PLAY / PAUSE button to start playback from the first
programmed track. The player stops automatically after all programmed tracks have been played.
20.
AUX INPUT JACK
1. Press the STANDBY / ON button to turn on the unit.
2. Connect the AUX cable from the output jack of your media player such as portable MP3 player to
the AUX input jack.
3. Slide the BUZZ / CD / RADIO / AUX function selector to AUX.
4. Playback starts from your media player.
HEADPHONE JACK
Your device is equipped with a headphone jack for private listening. Simply plug any 3.5mm stereo
headphone into the headphone jack. With the headphone connected the speakers will be
automatically muted.
TECHNICAL DATA
Frequency range:
AM 525 - 1615 kHz
FM 87.5 - 108 MHz
Back-up battery for clock:
2 x 1.5V AA batteries (not included)
Remote control:
2 x 1.5V AAA batteries (not included)
Power supply:
230V ~ 50Hz
ca. 2.7 kg
Net weight:
This device has been tested according to all relevant current CE guidelines, such as electro-
magnetic compatibility and low voltage directives, and has been constructed in accordance
with the latest safety regulations.
Subject to technical changes without prior notice!
21.
Publicidad
Tabla de contenido
