Sinbo SS 4037 Manual De Instrucciones página 12

Please contact the authorized after-sale service for any maintenance and damage
question.
Keep the appliance dry when you no longer use.
The instructions for appliances incorporating a battery that contains materials that are
hazardous to the environment shall give details on how to remove the battery and shall
state that the battery must be removed from the appliance before it is scrapped.
The appliance must be disconnected from the supply mains when removing the battery.
The battery is to be disposed of safely.
This appliance is not intended for use by persons (including children)with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Explanation on charge
Stop to use the shaver if it lost power, charge it for 8 hours, the shaver could be used
for about 50 minutes after fully charged.
Recommendation : the shaver can continue to use about 50 minutes after fully charged,
but we recommend you charge the shaver when continuous use for 40 minutes or you
feel about power down, you may not wait to be completely discharged when charging,
it helps to extend the life of shaver.
Attention during the charging course !
1. Never charge this shaver in the bathroom or shower room.
2. Charge the appliance in a location where it will not be exposed to direct sunlight or
other heat sources, at temperature of 5˚C to 35˚C.
3. Plug the power line into a household main socket where there is no moisture and
handle it with dry hands.
4. Do not damage or deform the power cord, do not place heavy objects on the power
cord.
5. Do not use the appliance if the power cord is worn, or if the power cord doesn't fit
snugly in the shaver coupling.
Charging the appliance?
1. Slide the switch to position off to turn off the shaver (See fig 1).
2. Insert the power cord to the power terminal of the shaver (See fig 2).
3. Plug the adaptor into household main socket (See fig 3).
4. When the charge connection is normal, the shaver indicating light turns on, the charge
indicating light must turn on during the course of charge. If the light fails to turn on,
please try again and make sure normal charge.
5. Please unplug the adaptor after 8 hours charge.
- 11 -