Product Safety Information; Product Specifications - Ingersoll Rand 7802A Especificaciones Del Producto

Product Safety Information

Intended Use:
These Drills are designed for drilling, valve guide reaming and cylinder honing operations
in the automotive industry.
For Additional information refer to Air Drills Product Safety Information Manual
Form 04580353.
Manuals can be downloaded from www.ingersollrandproducts.com.

Product Specifications

Type of
Models
Handle
7802A Pistol
7803A Pistol
7802RA Pistol
7803RA Pistol
7802R13-EU Pistol
7802AKC Pistol
7802RAKC Pistol
7803AKC Pistol
7803RAKC Pistol
† K = 3dB measurement uncertainty
pA
‡ K = 3dB measurement uncertainty
wA
Installation and Lubrication
Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a
properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any hose
coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling
disconnects. See drawing 16573180 and table on page 2. Maintenance frequency is shown in a
circular arrow and defined as h=hours, d=days, and m=months of actual use. Items identified as:
1. Air filter
2. Regulator
3. Lubricator
4. Emergency shut-off valve
5. Hose diameter
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
04580452_ed5
Chuck Free
Capacity Speed
in (mm) rpm † Pressure (L
3/8 (10) 2000
1/2 (13) 500
3/8 (10) 2000
1/2 (13) 500
1/2 (13) 2000
3/8 (10) 2000
3/8 (10) 2000
1/2 (13) 500
1/2 (13) 500
6. Thread size
7. Coupling
8. Safety Air Fuse
9. Oil
10. Grease - through fitting
Sound Level dB(A)
(ISO15744)
) ‡ Power (L
p
83.0 94.0
83.0 94.0
83.0 94.0
83.0 94.0
83.0 94.0
83.0 94.0
83.0 94.0
83.0 94.0
83.0 94.0
* K = Vibration measurement uncertainty
EN
Vibration (m/s²)
(ISO28927)
) Level *K
w
2.8 0.7
< 2.5 ---
2.8 0.7
< 2.5 ---
2.8 0.7
2.8 0.7
2.8 0.7
< 2.5 ---
< 2.5 ---
EN-1